Powder Metallurgy Automotive Parts
BLUE offers high-quality powder metallurgy automotive parts, and services worldwide. We have a strict quality inspection, and the latest equipment, with a team of experts with extensive knowledge.
Application of Powder Metallurgy Parts in Automobiles
Oil Pump
A mechanical device that is used in an engine to circulate oil to improve the efficiency of oil pump rotor and gear.
Water Pump
Water pumps are performing as the heart of the cooling system. Ensures the coolent keeps moving through the engine parts.
Shock Absorber
Help to control the spring-mounted vehicle's unwanted motion to vehicle's tyres in contact with the road surface.
Synchronizer Hub
Powder metal parts enable smooth gear shifting in vehicles with manual and dual-clutch transmissions.
Oil Pump Rotor & Gear
The oil pump rotor has four or five exterior lobes rotating inside an outer ring and five or six interior lobes. As the inner rotor’s axis was replaced with the outer ring’s axis, the inner rotor operate the outer ring, due to which the volume between the lobes changed.
As a result, the oil is driven out of the pump discharge tube after became trapped between the lobes. For rotor-type oil pump a pressure relief valve was also required.
While the oil pump gears are rotated within the tight-fitting casing and are made up of two meshing gears. The gears carried the oil which was delivered into the pump using the gear teeth meshing which transported a steady stream of oil to the engine’s components.
Water Pump Pulley
The main purpose water pump pully is to shift the movement of the drive belt into the bearing spindle. The pulley in the water pump receives the engine friction/traction and arbitrates the amount of torque so in short, it behaves as a medium between the two.
The pulley should be made up of strong material like cast iron, steel, or sheet metal and also should be lightweight and durable at the same time, as it experiences a lot of force and pressure from the drive belt.
At BLUE, we provide high-strength premium powder metallurgy solutions for automobile water pump pully and its components. we use advanced processes and high-quality materials, resulting in a strong, durable, and wear-resistant product.
Shock Absorber Parts
The shock absorber is made up of several different parts including piston, valve, seals, bushing, and coil spring.
In the shock absorber there is a cylindrical piece of metal called a piston attached to the suspension system that moves up and down in the chamber of hydraulic fluid helps to absorb the shocks and vibrations.
The valve helps to control the flow of fluid through the shock absorber and the seal prevents the hydraulic fluid from leaking out. Bushing help to reduce friction between the hydraulic fluid chamber and the piston. The coil spring helps to support the weight of the vehicle.
BLUE has developed a wide range of shock absorber parts for automotive industries. We perform a full inspection can ensure that every part is consistent before shipment.
Synchronizer Hub
A Synchronizer hub is a powder metal part that synchronizes mechanical connections during the gear change in the transmission widely used in automobiles for manual and dual-clutch transmissions.
The synchronizer hub has inside and outside splines whereas the outside has three notches, formed from external teeth, a rim, and a boss, with different thicknesses.
It requires the high-strength to resist torque transmitting and high hardness to resist sliding with the sleeve that meets with the external teeth.
At BLUE, we provide hassle-free and high-strength premium powder metallurgy solutions for auto-synchronizing hubs.
